Page 1 of 1
2f fj45 clutch
Posted: Sun Mar 04, 2007 7:20 pm
by pcman
about to start shopping for a new clutch for my 4x4 seems it cant handle 35's
are there any heavy duty clutches avaliable for these anywhere
keen to hear what ppl run in there 40's
Posted: Mon Mar 05, 2007 10:19 am
by RAY185
I run a daikin Exedy clutch (heavy duty). Probably one of the better clutches on the market and it has no probs turning my 35's.
Posted: Mon Mar 05, 2007 2:28 pm
by brighty
Sorry for the hijack.... but can a 2H cluch fit into a 2F.
Reason being I got a Heavy Duty Exedy Safari Tuff Clutch for a 2H thats only done about 1000kms and I was thinkin of thrown that into the 2f if it fits.
Posted: Mon Mar 05, 2007 7:09 pm
by **surmo**
I ran a heay duty rpm clutch in my 45 crusier and had 35'' claws. flogged it for 2 & a half years and it was still good when i sold it.
Posted: Mon Mar 05, 2007 7:31 pm
by dogbreath_48
I took out what i believe was a safari. It still had plenty of meat on it but was a real pig to use and i had it slipping on more than a few occasions.
I replaced it with a 4terrain by Clutch Industries. It feels a little heavier but is much nicer and more progressive, never slipped despite mass abuse. Appears to be made a little better and comes in a great looking wooden box
I got mine from bursons for $460 or $560, don't recall.
I've been running 34" simex and now run 37" mickey T's on a double locked HJ75 troopy (i.e. traction galore).