A while ago there was a seatbelt topic about seatbelts, i mentioned i had a NT body with the non-retractable belts which are freyed to shite, but i have some retractable belts in good nick from my spare WT body. Problem is, my NT body doesnt have the means to bolt the retractables in as there is no hatch or anything to mount them the same as the WT, i would have to cut into the bodywork.
Has anyone done this, is it legal? Is there still mounting points under the outer skin if i cut it off for retractables?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
retractable seatbelts into NT
hmmm... we got a LWB NT that Sly wants to convert to the WT seatbelts...
but he still has the removable plate in the b-pillars, so replacing them with the WT plates as mounting is all on this plate.
should be a pic of the seatbelt recess in here;
http://www.pointnshoot.org/modules.php? ... =0&thold=0
Spock
but he still has the removable plate in the b-pillars, so replacing them with the WT plates as mounting is all on this plate.
should be a pic of the seatbelt recess in here;
http://www.pointnshoot.org/modules.php? ... =0&thold=0
Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
i put wt retractables in mine and i just bolted up the bottom mount hole on the new seatbelts to the previous hole. i removed the backing plates to the wt belts also as i didnt need them and they just got in the way..
i am yet to install a lift for my driver side seat as it doesnt clear the retractor (?) thing. need about 5 mm lift
i am yet to install a lift for my driver side seat as it doesnt clear the retractor (?) thing. need about 5 mm lift
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Soon: Aircon + tinting?
Who is online
Users browsing this forum: No registered users and 3 guests