Page 1 of 1

Spline count on X90

Posted: Sat Mar 10, 2007 10:20 pm
by Squik
Putting lockers in the X90, can anyone confirm the rear spline count? I've confirmed the front is 26 by scouring the internet... is the rear the same?

Posted: Sun Mar 11, 2007 10:15 pm
by SiKiD_01
oh man, its been so long that i can't remember the rear spline count.

but on some earlier model vitaras, the front shafts have a 26 spline outer, and a 22 spline inner. i haven't been able to find a 26/26 spline front shafts up here. and i've taken some shafts off a 94 model. maybe the efi ones had the spline change. as fo rthe rear, i can't help.

and still working on that quote for you.

Posted: Sun Mar 11, 2007 10:25 pm
by Squik
Thanks mate... fark, nobody seems to be able to say EXACTLY which model compares to which overseas.

Posted: Mon Mar 12, 2007 8:23 pm
by cj
All the rears are 26 spline but that's not the issue. What you need to know for the rear is whether it is a 10 or 12 bolt R&P and yours should be a 12 bolt. On the front it whether it is a 22 or 26 spline shaft and yours should be 26. It's only the sidegears on the front that is different with between the front ARB lockers.

Posted: Mon Mar 12, 2007 8:26 pm
by nicbeer
pull em out and see. not too long job

Posted: Mon Mar 12, 2007 9:03 pm
by Red_Zook
nicbeer wrote:pull em out and see. not too long job
X2

PADD