Outer Limits 4x4 Board

I just purchased a Haltech programmable ecu for project "OOZUK"

I have a wiring chart but what i need is sensor pinout information for the follwing,

* 4-wire tps switch
* 4-wire distrubitor
* 2-wire idle stepper motor
* coil
* coil igniter

i need to know which pins on each one does what...

Please help i wanna start this before the wkend so i can hit the dyno with it

do you need color codes or what signals they give?,

i'll see if there is anying on my diagrams at home.

Nic

what signals go in and out, eg earth 5v+tive, signal , ect ect

ok's

had a look - the diagrams or notes dont say either in/out but give the volts for testing purposes. Dealer may be able to halp of maybe cj or other has the data in more detail.

this link has all the voltages for various sensors connected to the ecu. cant see on there the ism or a 4wire dissy as there is only a 2 wire and 3 wire.

http://home.exetel.com.au/hrzook/wiring ... G16A-B.pdf

thanks that just might get me out of the shit