did a search but couldnt come up with anything.
has anyone got info/photos of shaving some off the bottom of a 40/60 seris diff. been told you can get 1-2 inches off there.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
shaving diffs
Moderators: toaddog, TWISTY, V8Patrol, Moderators
shaving diffs
HoldFast RocKrawlin
Here you go mate ....
I didnt measure before hand but easy and inch of extra gain .....plated back in with 6mm ground and smoothed the outer and welded the inner ....I didnt go to the extreme ie: minimum kept a wee bit of clearance off the crown just incase a hard knock pushes it in a bit .....
pics front
rear
I didnt measure before hand but easy and inch of extra gain .....plated back in with 6mm ground and smoothed the outer and welded the inner ....I didnt go to the extreme ie: minimum kept a wee bit of clearance off the crown just incase a hard knock pushes it in a bit .....
pics front
rear
[b][i] DAN [/i] [/b]
:silly:
:silly:
Who is online
Users browsing this forum: No registered users and 3 guests