Hi all,
a 97 model 4 cylinder manual Prado, constant 4wd, manual select into High Locked, Neutral, then Low Locked. The transfercase gets stuck in constant 4WD. Attempt to move it out of constant 4WD and the lever is jammed.
Remove the shifter, realign the selector, all shifts OK and feels good. But concerned that it may happen again.
Has anyone come across this problem with the Prado transfercase before and found out why - or how to stop it happening again?
Thanks
Peter K.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Prado Transfercase getting stuck in constant 4wd High
Moderators: toaddog, Elmo, DUDELUX
have you tried to reverse a couple of metres and then tried shifting again? Maybe it's wound up if you're running it on bitumen or a hard surface you'll wind it up. A lot of suzi sierras get this problem but their selectors actully just fall outa line. I know lots of guys who can fix without even stopping.
Who is online
Users browsing this forum: No registered users and 1 guest