Outer Limits 4x4 Board

Posted: **Thu Mar 22, 2007 5:38 pm**

I've searched but not useful...

I've got to remove the steering arm on the steering box in order to change the position since i've changed from NT to WT diff... Why i'm doing this is i get more right side turn then the left turn at full lock.

Question is.....How do i get it off... it's

tight

any help is greatly apprectated...(spelling?)

Posted: **Thu Mar 22, 2007 5:59 pm**

1. Heat

2. Big hammer

3. Bigger hammer.

Coxy

Posted: **Thu Mar 22, 2007 6:47 pm**

heat?..... where do i get one of those small bottled torch these day?

Posted: **Thu Mar 22, 2007 8:01 pm**

best bet would be to find a friend with a small oxy set and borrow it. heat always works, if it wont budge at first more heat, just keep on heating.

Posted: **Thu Mar 22, 2007 8:03 pm**

map gas from bunnings should be ample. Remember heat, don't melt

Posted: **Thu Mar 22, 2007 8:18 pm**

okay.... while i'm at it... what should i look out for... like seal in steering box? etc