Outer Limits 4x4 Board

Hi guys,

Currently doing 1.6 16 valve efi conversion on my sierra. Just after some pics of how others have mounted there airbox or other vehicle airboxs which are a better fit?

Any help would be great. Thank you.

Hey,

Take a gander at this thread;

http://www.outerlimits4x4.com/viewtopic.php?t=100149

I am using the orig vit airbox in my sierra conversion and hope to hookup a 3" snorkel as well.

I can get any more pics if needed.

Nic

I run the vit airbox as i believe the efi was set up with it and i think it runs better since i changed it (origonaly had the sierra box in there) I also run a snorkle off it.
I will try post some pics tomorrow.

Cool thanks nicbeer, thats a neat engine bay you have there. That looks like the setup i was thinking of.

Thanks hyzook any pics would be great.

Chris.

OK here are some pics of the snorkle and box.
I plugged the origonal intake hole with rubber and urathane, then using exhaust tube I cut a series of slots at one end and bent a lip right round it and slipped it through a new hole in the airbox and urathened and rivetted it. The snorkle which is bolted down to a bracket on the inner gaurd is then joined to the pipe with a rubber hose and clamps.


IMG]http://i164.photobucket.com/albums/u30/ ... 0_0589.jpg[/IMG]

Good job hyzook that looks very tidy. Well got some ideas now thanks guys.

Chris.