Page 1 of 1

bundy front axles

Posted: Tue Mar 27, 2007 8:26 pm
by killalux
is there any other front axles that will fit a bundy, i know lux don't, will 75 series fit??

Posted: Wed Mar 28, 2007 10:21 am
by gotoy
75, 80 and 100 series all will fit.

Posted: Wed Mar 28, 2007 12:57 pm
by Hales231271
I think Bundera axles are there own animals.
I could not see 80 fitting as it is a wider diff.
75 mabey??

Cheers
Dazza

bundy axles

Posted: Thu Mar 29, 2007 9:10 am
by SHANE055
mark from marks 4wd adapters has a bundy and in issue 70 and 71 of 4wd monthly they do a story on him swapping 80 series axles into it but he does front and rear and there's a 98 (ifs) lux in issue48 with a bundy axle swapped into the front

Re: bundy axles

Posted: Thu Mar 29, 2007 11:06 am
by STUMPY
SHANE055 wrote:mark from marks 4wd adapters has a bundy and in issue 70 and 71 of 4wd monthly they do a story on him swapping 80 series axles into it but he does front and rear and there's a 98 (ifs) lux in issue48 with a bundy axle swapped into the front
What KILLA want to know is, is there any other toyota axles the same length as the bundera so he can use them in the front bundera housing.

Posted: Thu Mar 29, 2007 12:43 pm
by killalux
yaeh thanks stumpy

Posted: Thu Mar 29, 2007 12:47 pm
by Hales231271
Do you want some killa?

Cheers
Dazza

Posted: Thu Mar 29, 2007 4:01 pm
by dow50r
The 78/79 front has thesame but bigger c/v's...the lot is narrower, arm brackets are 60mm closer, axles are bioth shorter than 80 ones....would be easy to repo an 80 brackets and bolt in....
79 has huge brakes too, 80 ones fit aswell for 6 studs...

Posted: Thu Mar 29, 2007 6:36 pm
by killalux
Hales231271 wrote:Do you want some killa?

Cheers
Dazza
would be keen on some spares.

i would definatly consider swapping in a 78 series front end if one came up for the right price.
my thought at this stage is using a 75series front end and putting all the bundy brackets on it, would be easier to get spares that way.

Posted: Thu Mar 29, 2007 6:43 pm
by Hales231271
If you find a 78 front leave your hands of it!
It's mine!
Next best option would be a 75 front HP diff.
Don't use bundera arms but 80 arms.
Get the brackets from an 80.
Can set them up so rear mount point is directly under chasis.

Username Evil 73 has a couple of pairs of short and long axles for Bundera.Could try him.I think they are complete with cv's.
Mark Cheezy has a pair kicking around aswell I think.
I was going to get them before the Pajero but cash ran out.

Cheers
Dazza

Re: bundy axles

Posted: Thu Mar 29, 2007 7:06 pm
by SHANE055
What KILLA want to know is, is there any other toyota axles the same length as the bundera so he can use them in the front bundera housing.[/quote]

ah you mean just the axle not the full hub to hub set up sorry my bad