Outer Limits 4x4 Board

I'm positive ive seen it before. Ive been looking and searching and cant find/remember where.

want to look at the specs/any more pics there may be on it.

can anyone point me in the right direction?

Looks like one of rocky road outfitter ones.

Me to! I can tell you its the original " zukinni " I have a small article on it in an old american mag. It was built quickly to compete in top truck. I think it initialy had vit 1600 with twin webbers? Toy axles not sure on transfer. Then changed to 1.9 turbo diesel and dana44s. Go to rocky-road.com for more info.
Glenn wakefeild (owner of zuk and rocky road) and Tim Hardy are alot of the reason I love zooks these guys were doing things years ago that have only recently become mainstream.
Id love to find more info on these guys.
Nik

think the 1.9 turbo deisel is out of a volvo.. thats bout all i remember

thats it!

thanks guys.

damn i would love to own a zuk like that! Love how it looks so well porportioned. low but still fitting big rubber neatly!

it looks as if the guards have been opened up a fair bit on it at front and rear of the wells/tubs. Wondering what flares have been used to follow the curve? (or am i seeing things?)

PAZZ wrote:think the 1.9 turbo deisel is out of a volvo.. thats bout all i remember

Volkswagon golf !!!

haha least i got the V in the kind of car right! new it was sumthin starting wid a v, was a long time ago i read bout it, i was still in school!

It is glen Wakefileds Zukinni. I had a drive of it and in it at Moab. Awesome little car. It was running 35 x 15 Swampers and a Sidekick (Vitara) 1.6 not the VW diesel. i don't think he ever had the diesel in it. The falres were Calmini I believe, you can get them here I had them on my Sierra.

actually those were the RRO flares, they were fibreglass and pretty much sucked ( I had a set on mine for a while)
The latest calmini ones are actually made here in Oz.

Liam wrote:actually those were the RRO flares, they were fibreglass and pretty much sucked ( I had a set on mine for a while)
The latest calmini ones are actually made here in Oz.

I think he changed over to the Calmini ones at a later stage (or it could have been the guys from Spidertrax can't quite remember) because as you said the fibreglass ones sucked. one of the guys with us had them and destroyed the drivers side flares when he leant the car over on Upper Helldarado. Didn't need much force to wreck them

Nice Zook. Makes me almost wanna get another one.

I can tell you first hand glenn never ran calmini parts in those days. In fact He helped me build my first rig. He was building zukini when I was building zuku. His first rig tonka is what inspired me to build a samurai. He was very much against calmini back then and convinced me to run a Spoa (which was a new lift kit then) on my build. Man was that a long time ago. In fact the company was called summit off-road back then. I have the mags in storage I can get them in the morning. I'll scan them but need some one to host the scans for me.