Page 1 of 1
Quick diff question
Posted: Mon Apr 02, 2007 7:42 pm
by built4thrashing
Will a 1.3 NT diff ctr fit in a WT housing? are axle splines the same ?
Or do i have to swap over the crown wheel and pinion?
thanx
Posted: Mon Apr 02, 2007 7:57 pm
by muppet_man67
yep they are the same exept for ratios.
Posted: Mon Apr 02, 2007 7:57 pm
by NIK
The centres will bolt in the same as the wt ones but make sure you have the same ratio f & r I think nt are 3.9 and wt are 3.7.
Nik
Posted: Mon Apr 02, 2007 8:09 pm
by built4thrashing
sweet
mate in the bush has found me a rusted out NT with perfect running gear so im gonna swap diffs to get better gearing.
Posted: Mon Apr 02, 2007 8:54 pm
by NIK
Yes thats what I did and with the front you should get the 4 pin carrier which can take a locker.
Nik
Posted: Tue Apr 03, 2007 8:04 pm
by built4thrashing
prob gonna swap the welded ctr over in the rear and change the crown gears. Not to fussed ATM with a locked front. I still drive it on the hard stuff