Page 1 of 1
GQ radius arm mod (80s rear bush)
Posted: Tue Apr 03, 2007 2:21 pm
by sudso
Has anyone used 80 series style radius arms on their GQ? (eye bushes on the rear the arms)
Posted: Tue Apr 03, 2007 3:33 pm
by oondy
Hey dave,
unbolt one radius arm at the diff end and see how easy it actually swings up and down. the pin type bush doesn't limit it as much as you would think.
cheers
OONDY
Posted: Wed Apr 04, 2007 8:49 am
by sudso
cheers, thanks oondy.
Wasn't actually inquiring for that reason though, I was thinking the 80s style is stronger. (We know how the bush seats in the GQ chassis bracketry can break out under high stress)
Dont worry, if I go that way I'm sure you can make drop arms to suit it
Cheers.
Posted: Wed Apr 04, 2007 10:00 am
by nastytroll
2DEXTREME on this site has made some you can pm him for any details or manufacture
Posted: Wed Apr 04, 2007 11:20 pm
by bru21
mine are done. I used thirds arms and threw the swivel bush. made up out of a crush tube and brackets and It is easy to do. I broke my standard arms using them to lever my diff so i could line up the bolts in my thirds arms. I had one hand on them. They had not been abused and were such a poor crystal structure. I think competing on them is plain dangerous.
Posted: Thu Apr 05, 2007 1:19 am
by sudso
When you say "mine are done" bru21 are you saying your arms have the 80s bush set up where it bolts to the chassis?
cheers
Posted: Thu Apr 05, 2007 5:59 am
by lexi
Can you show a pic of the two set ups?
Alex
Posted: Thu Apr 05, 2007 6:41 am
by bru21
yes I no longer use the factory arms or principal. I run 80 series style double shear bolt. I used the front arms that thirds make without the swivel. (essentially 80s arms that bolt up to a nissan. sorry I wasn't clear. I had pics in my members
cheers bru