Page 1 of 1
Adjustable panhard rod fitting
Posted: Tue Apr 03, 2007 6:59 pm
by Stu'sBeast
G'day guys
Anyone got any tips when I fit my adjustable panhards?
My plan is to use a ratchet tie down strap to get everything nice and central then throw her on, This sound good?
Will I need to adjust my steering arm and RTC dampener?
cheers
Stu
Posted: Tue Apr 03, 2007 8:41 pm
by outback_lux
never done one or never heard of how to do one or never seen one done but this is my stab in the dark,
measure how many inches or mm your tyres hang out on one side then half that/get a middle measurement of what the tyres hang out by
get the measurements from the centre of each hole of the standard panhard rod
grab new adj panhard rod and set it to original measurements and add on that half of the tyre measurement onto that and that should get the ball rolling in the sort of correct place,
fine tune it from there
its all about measurements
Posted: Wed Apr 04, 2007 8:59 pm
by jet-6
Its really easy, just get a mate to push the car to where it looks right, adjust and put on, measure and adjust to suit
I have done that many i can lay under the car, push with my foot and install it mayself with no tools(apart for the nut)