Outer Limits 4x4 Board

Hey guys..
Just in the process of snorkel ideas.. i saw this one on a pootrol for sale in here, its got a three inch stainless pipe being used for the snorkel with a 90* rubber bend outa the side of the motor, goes to the pipe, a 45* rubber bend when it gets to the pillar and another 45* at the roof outa rubber again. It has no head on it as such. I wos just thinking of doin that to my lux, but what goes on with water.. when it rains where does the water go, cuz the safari that i had had those drains at the top.. How to you go about stopping the water..? Cheers guys.. ps any pics of these fitted to any car would help too if possible..
with thanks Chris.

http://carl.outerlimits4x4.com/viewtopi ... ss+snorkel

quite a few pics n info here

SEARCH NOOOOOOOB

i have but as usuall... there all in hiding somewhere on this network.. i new someone would say that.. i tried!! haha Thanks for the steer in the right direction m8. Cheers

here is my one

http://www.outerlimits4x4.com/viewtopic ... om+snorkel

k kawesome.. i did this post bout 10 mins ago... Cheers for the quick re's. Umm so how do you guys go about making sure no rain goes into your motor?? I notice white lux.. you got no hed on it?? Do you have one of those donaldson precleaner s?? Cheers

The heads have water seperators built into them. The water is meant to channel to the little slot in the front and back of the snorkel head.

If any gets past this, it doesn't make it even to the filter... and if it did make it to there, that's where it would stay.
It usually just stays on the insides of the pipe or in the bends I think.

Oh yeh cheers, yeh i no how the heads work but what about the guys above that just have the pipe hangin at the top without a proper head a such?? Cheers guys all help appreciated.