Outer Limits 4x4 Board

Hi I have heard that a 80 series cruiser standard front spring will go in the front of the disco and give it 3" of lift....does anyone know if this is true??? what goes in the rear to equal out the front?? cheers

if thats the case just put the same in the rear with a spacer. and if any one can conferm they fit thats exactly what i will be doing

I thought the crusers front coils tapered down to a smaller diameter at the front lower perch, unlike the rover.

Slunnie wrote:I thought the crusers front coils tapered down to a smaller diameter at the front lower perch, unlike the rover.

They do, but if you flip the spring perch over (unbolt it, flip and rebolt it) they fit inside nicely. Ill try and find the pirate thread on it

That is legendary!

Thanks for this Turoa!

It is good.....but there is still the question of what to use in the rear??? what sort of lift does the rear get with standard 80 series rear springs??? will it be the same as the front???

mroffroader wrote:It is good.....but there is still the question of what to use in the rear??? what sort of lift does the rear get with standard 80 series rear springs??? will it be the same as the front???

grab the rear ones if you're doing 80 springs and we can make em fit

BTW, I measured your lift today, and you have 1" on the front (springs must have sagged) and 2" on the back. This is in comparison to the range rover

On my Disco2 the front weighs 1.1T, the rear 1.2T, so I would expect in a Disco1 that the spring installed lengths will come up at about the same - if that helps.

what free length are the 3" springs?
as i think mine have sagged bout 2.5 inches (which is handy for me atm due to wife being 8 months cooked)

put my 2"80s fronts in today brought the front back up bout an inch and3/4
back to 5 .5 inch springlift
so i have a set of reset disco springs for sale soon as i get the rears in (bout 4.5 inch lift ) the 80s springs fitted beatifully just gotta get the rear perches modded to take the tappered spring will post some photos tomorrow if i get time

I got lovells Range rover 2 inch springs which lifted the Disco v8 75mm. Thats a good option as the price is really good and I have had them in for 2 years and they aren't sagging yet.