Outer Limits 4x4 Board

Gday guys..
Having major dramas getting the front fixed pins outa my 94 solid lux. The drivers side front came out alright.. really bloody rusty but ok,, the passenger side is jammed in the hard with rust . Any ideas or ways of getting this out?? Cheers Guys

Heaps of WD-40 or i think its Roast Off made by Wurth..

Maybe you could try some slight heat if your gonna replace the bush anyway then it wont matter if ya melt it

hey m8, yeh i used a 1/4 of a bottle allready , ive given up for today purely for the fact that i wos getting to the stage where i was gonna belt the car or sumfin dumb like that, but, i might have to invest in a small oxy.. do you no how much they are? Cheers m8, anyone else??

Lux_89 wrote:hey m8, yeh i used a 1/4 of a bottle allready , ive given up for today purely for the fact that i wos getting to the stage where i was gonna belt the car or sumfin dumb like that, but, i might have to invest in a small oxy.. do you no how much they are? Cheers m8, anyone else??

just cut it and buy some new pins

if its siezed that bad it will be fucked anyway.

cut the nut off or cut down between the spring and the perch.

I no.. they are absolutely stuffed. I have gotten the nut off, just cant bash the pin out enough to get the grinder in there, there is actually like, from the outer plate where the 2 lil bolts go in to hold it, well on the other side, where they are resessed in if you follow that, you have to bash it out atleast 10mil to get the blade onto the actual shaft of the pin. Cheers

OXY IT

i aint got no oxy unfortunetly.. how much are they for a smallish one? Cheers

Lux_89 wrote:i aint got no oxy unfortunetly.. how much are they for a smallish one? Cheers

youve gotta rent the bottles, but the regulators and torch is about $400

Holy crap.. i dont mean those big ones in the stands, just a handheld one, like the size of a small fire extinguisher. Usually sparky's have em?

Lux_89 wrote:Holy crap.. i dont mean those big ones in the stands, just a handheld one, like the size of a small fire extinguisher. Usually sparky's have em?

still gotta rent the bottles,(oxy and acetalyne) but you might be able to get the regulators and torch cheaper. $200 min i would imagine for cheap stuff.

shit aye. that expensive. A guy over the bak has one, i might go door knocking i think

small ones are about 20-50 bux at bunnings.

May not crank out enough heat but. worth a go.

Nic

nicbeer wrote:small ones are about 20-50 bux at bunnings.

May not crank out enough heat but. worth a go.

Nic

theyre not oxy, thats butane, and dont generate anywhere near the same amount of heat.

Yeh there the ones i was thinking of.. so you recon dont even bother with one of them shadow?? thanks guys

Lux_89 wrote:Yeh there the ones i was thinking of.. so you recon dont even bother with one of them shadow?? thanks guys

wouldnt hurt to give one a go, but i wouldt buy one just for it.

alright then, im sure it woulc come in handy elswhere but.. oh well, i cant bash it out enough to get the grinder to the actuall pin, so there goes that, wdfort aint working, looks like my best bet will be to buy one of the buggers..

Lux_89 wrote:alright then, im sure it woulc come in handy elswhere but.. oh well, i cant bash it out enough to get the grinder to the actuall pin, so there goes that, wdfort aint working, looks like my best bet will be to buy one of the buggers..

can you get the grinder in between the leaf and the perch? us one of the thin blades and you should be able to cut the pin both sides of the leaf.

now that is another idea, thanks m8, il give that a hit tomorrow and let you no how it goes m8, thanks again

hey guys, currently goin very slowly with getting the pin out, any slower and goin backwards... Ive tryed heating it up, no suxxes, managed to cut one side with the grinder, think im gonna need a bigger grinder though, as im using three blades to one side as the blade dosent stay big enough to reach in long enough.. im up for a new mount now but im thinkin f**k it.. its the parts truck now!! Recon get the bigger grinder??