Page 1 of 1
32" JT2's ????
Posted: Tue Dec 02, 2003 6:36 pm
by Tony78rr
Can you get a JT2 in a 32 inch or there abouts height. I have 7 inch rims
Any info on links for spec sheets and / or pricing in Vic would be a huge help.
Thanks in advance
Posted: Tue Dec 02, 2003 7:10 pm
by N*A*M
i don't think i've heard of them in a 32 size
by my 34s it's only another 1" in radius that you have to make clearance for
link in sig
thanks
Posted: Tue Dec 02, 2003 8:12 pm
by Tony78rr
Thanks but 34's would spell a sorry end to my 10 spline axles and CV's
Re: thanks
Posted: Tue Dec 02, 2003 8:40 pm
by bogged
Call Locky at Procomp Tires in Melbourne... Narre Warren...
Top bloke.. and on this forum.
http://www.simex4x4.com/simextt.html says Extremes are available in 31, 32 adn 35, but no mention of JT's..
Re: thanks
Posted: Wed Dec 03, 2003 9:22 am
by Bodge
Tony78rr wrote:Thanks but 34's would spell a sorry end to my 10 spline axles and CV's
You might be surprised - with a little restraint you can make them last... The diffs are the weaker link...
I have had 34JT2 with 10 splines for two years only one CV in a winch challenge bit the dust so far [oh and the inner axle that went with it]. I fully expect the axles to look like pretzels when I take em out though
Emphasis on the restraint - do as I say not as I do.....
Re: thanks
Posted: Wed Dec 03, 2003 11:53 am
by flat4
bogged wrote:Call Locky at Procomp Tires in Melbourne... Narre Warren...
Top bloke.. and on this forum.
http://www.simex4x4.com/simextt.html says Extremes are available in 31, 32 adn 35, but no mention of JT's..
Try this link:
http://www.simex4x4.com/technical.html
If you have 16 inch rims then JT2's don't go smaller than a 33". But there is a 31x10.5x15.
Steve