Page 1 of 1
Measurments GQ/GU 3" or 4" lift
Posted: Wed Apr 11, 2007 10:07 am
by hdn177
For a gq or gu if u get exicted....Anyone got some measurments from the center of hub to the wheel arch front and back... with aprox 3" or 4" lift please??? in mm too
cheers
Posted: Wed Apr 11, 2007 4:26 pm
by oondy
My GQ LWB has in the front Dobinson C45-108 75mm coils + 15mm spacer, loaded with steel bar, winch + dual batteries, centre of hub to metal part of arch:
drivers: 640mm
passengers: 630mm
cheers
OONDY
Posted: Wed Apr 11, 2007 7:15 pm
by j-top paj
hmmmm what are u up to
Posted: Wed Apr 11, 2007 8:09 pm
by hdn177
nothin much
narh just checkin were mine sits i got 640mm in the front and 690mm in the rear
extdended brake lines were ordered today
Posted: Wed Apr 11, 2007 8:20 pm
by InSanE
a more acurate measurement would be to measure from bottom of rim to lip or guard or between the bump stops
Posted: Thu Apr 12, 2007 6:21 am
by hdn177
InSanE wrote:a more acurate measurement would be to measure from bottom of rim to lip or guard or between the bump stops
possibly but if ur rims bent, or 15" or 16" or even 17" would be different, the hub to top of arch dosnt change no matter what wheel combination u have! and bump stops can can be changed too.
only way we would get different between trucks would be weight on truck/ and sagged out suspension. oh and manufacture differnce, thats wot im looking for
cheers
Posted: Thu Apr 12, 2007 8:41 am
by oondy
hdn177 wrote:nothin much
narh just checkin were mine sits i got 640mm in the front and 690mm in the rear
extdended brake lines were ordered today
thats pretty much exactly how mine sits.
I have some progressive rate dobinson coils in the bum - not the usual 100mm lift rear.
cheers
OONDY
Posted: Thu Apr 12, 2007 2:56 pm
by gut42
[quote="hdn177"][quote="InSanE"]a more acurate measurement would be to measure from bottom of rim to lip or guard or between the bump stops[/quote]
possibly but if ur rims bent, or 15" or 16" or even 17" would be different, the hub to top of arch dosnt change no matter what wheel combination u have! and bump stops can can be changed too.
only way we would get different between trucks would be weight on truck/ and sagged out suspension. oh and manufacture differnce, thats wot im looking for
cheers[/quote]
Would also be different for body lifts.
Posted: Thu Apr 12, 2007 4:45 pm
by GUEEY
GU Wagon , 3 inch Ridepro , Outback draws, long range fuel tank etc
630mm rear centre hub to flair
620mm front " " "
Runing 35 Claws n o front mud flaps!
Cheers
Grant.
Posted: Thu Apr 12, 2007 10:23 pm
by hdn177
gut42 wrote:Would also be different for body lifts.
thast y i only asked for 3" or 4" not 3 or 4" with "BODY LIFT"
thanx