Page 1 of 1

anybody out there done a coil conversion on a 60 series

Posted: Thu Apr 12, 2007 10:12 pm
by mr304
looking at doing a coil conversion on the rear of my 60 series just wanted to know if anybody has done one and if anybody has photos of setups

thanks

Posted: Sun Apr 15, 2007 8:13 pm
by mr304
hello anybody please help need ideas

Posted: Sun Apr 15, 2007 8:16 pm
by Sic Lux
Have you tried the search and maybe a good look through the mebers section

Posted: Sun Apr 15, 2007 8:20 pm
by A1
There was 1 forsale up here in Newy in a small caryard never stopped to have a gander but a few friends did but I cant remember there comment ......


there's a fella on outers that transplanted the 60 shell onto a GQ chassis from memory does that count ;)


What kind of link setup you looking/wanting to use ......putting a 80 series complete housing and 5 link set up may be an option cut all the 80 factpry mounts off and re-fit the 60

But a well setup 4 link or A frame would be better in long term in my mind ....

Posted: Wed Apr 18, 2007 10:22 am
by ozy1
Dan,

we are currently talkin over ideas as we will be doing a cab swap on his 60, that way all chassis mods can be done while the body is off, we have been talkin about an aframe setup, and also the factory 5 link from an 80 series,

he has a spare diff housing and chassis that we will be doing all the mockup on,

im leading towards an Aframe, but final decision is up to him, may even 4 link it yet, he was just lookin to see if others have done it, and their thoughts on their setups,