Page 1 of 1
hj75 fly wheel + v8
Posted: Fri Apr 13, 2007 5:59 pm
by known 2
hey, i'm wondering is it the standard 75 series flywheel they use when a v8 conversion is done using marks adapters, from a 2h to a 308.
as i'm looking for something lighter. sooooooooo heavy.
fly wheel
Posted: Fri Apr 13, 2007 10:12 pm
by 75 cruser
just have finished a 308 v8 conversion and used the the holden fly wheel and holden clutch (heavy duty)with a toyota main shaft in the clutch and had no problems off road or on road
rob
Posted: Sat Apr 14, 2007 6:52 am
by badger
why lighten a factory flywheel on a 4by?
it will decrease your crawling ability. lightening flywheels only makes engines rev quicker. wont make it hold torque etc
Posted: Sat Apr 14, 2007 2:52 pm
by known 2
i've heard that a few times now, but it makes it harder to launch especialy up hill.
Posted: Sun Apr 15, 2007 4:37 pm
by Struth
I agree don't go a lightened flywheel or you will lose torque when you need it most. Surely the V8 will give an adequate power increase for launching?
Cheers