Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

URGENT HELP Locking Hub

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 224
Joined: Sun Jul 23, 2006 4:47 pm
Location: Cornubia

URGENT HELP Locking Hub

Post by Sean »

G'day,

Just finished repairing my leaking drivers hub, took the selector face plate off, put the new gasket on topped up diff oil. and now i get very heavy rough feedback in my steering when

going 40 onwards with hubs locked 2wd
in between 60 and 70 bubs unlocked 2wd

from what i can tell everything is on ok.

Can anyone help?
Anything else you need to know please ask.

Cheers,
Sean
[quote="v840"]fat chicks actually [i]do[/i] give better head cause they're always hungry![/quote]
Top
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

have you over tightened some bolts perhaps!??

dont ya hate fixing one problem to encounter a new one!! Barstdios! lol
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

hub bub

Post by want33s »

It sounds like maybe you have incorrectly reassembled the hub and it is locked constantly. Jack up both front wheels and check one at a time with car in gear so front shaft doesn't turn.
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Re: hub bub

Post by lay80n »

want33s wrote:It sounds like maybe you have incorrectly reassembled the hub and it is locked constantly. Jack up both front wheels and check one at a time with car in gear so front shaft doesn't turn.
+1, Locking hubs can be a bastard sometimes. Did it come apart when you removed it. Oh, and if there is diff oil in your hubs that is leaking out of the locking hub flange, you have issues further inside than the locking hub gasket. That gasket is there to stop grease from the bearings/hubs getting out, and crap getting in. It there is diff oil in your hub/bearings, check your inner axle seal, and also that your kingpin bearings are not shit, causeing your swivel hub to move and put pressure on the inner axle seal. If there is diff oil in the hub it will also re-pack your CV and wheel bearings, as without grease they will wear and fail. The diff oil will wash the grease out, and the oil itself will not correctly lubricate the bearings/CV.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

hey sean where are you as someone might be able to help
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
User avatar
Ric
Posts: 302
Joined: Wed May 05, 2004 12:26 pm
Location: Brisbane

Post by Ric »

built4thrashing wrote:hey sean where are you as someone might be able to help
yep all fixed, was steering box.
'07 ML Triton

12 tonne excavator for hire:0421 076 548
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 67 guests