Outer Limits 4x4 Board

Gday,

Am removing a v6 commodore motor for a conversion into my 4 runner. Am having problems getting the fuel lines off the back of the fuel rails. Is there a trick that i dont know about.

Thanks

Dave
0424796069

undo the hose clamps and use a pair of pliers to twist it off would be tight from never being removed and if you need to remove the injecters there is a clip that gets pushed back against the intake runners

or use a knife to cut them then get them off once motor is out

the later model ones have a quick realease type they have a clip u need to remove. thats if u mean the fuel line and return line.

Thanks guys.

It just needed alittle bit more love and she popped off.

dai-hard,

Yes i did mean the fuel line and return line.


Thanks again

Dave