Outer Limits 4x4 Board

I've got a nikki two barrel carby sitting at home and need to find out what car it came off. People have said mazda 626 or 929 rear wheel drives but checked them out and the intake diameter is only 70mm whereas the one i have is 80mm.

It has a power choke, adjustable just about everything, primary and secondary cylinder. (side note, does secondary open up on full throttle or does it need vacuum as well to open? i've opened the throttle up a few times but the secondary doesn't open up just using the accelerator cable...)

Some people also rumour that its off a hyundai as well....can anyone help?

Some pics

little bit of info here

http://www.rx7club.com/archive/index.php/t-521292.html

Mazdas look to be the find for them, rotary ones had them it seems.

also since u got a piston manifold geminis also had them.

http://www.giant.net.au/users/wight/Car ... 20Mods.htm

Nikki carbs were on alot of jap cars in the late 60's/early 70's. They were sh!t.

thanks for info...

gonna give it a try on the G13a to see how it goes with a crow cam as well... thats if i can find a suitable intake for it without having to mod the bonnet. i probably should just get a G16 AND STOP screwing around with the G13.

dank wrote:thanks for info...

gonna give it a try on the G13a to see how it goes with a crow cam as well... thats if i can find a suitable intake for it without having to mod the bonnet. i probably should just get a G16 AND STOP screwing around with the G13.

When my suzuki carby played up, I got a carby off a vitara. more fuel, more response etc. And it all bolts on without any problems. Had to get it reco-ed as the choke was playing up, after that it was very good.

This is on the G13 by the way!

werent they originally on geminis?
if so they can be modded to work well but most people replace them because stock they are st1t