Page 1 of 1
Putting 35's on a surf
Posted: Mon Apr 16, 2007 6:16 pm
by Wld_Srf
hey guys just wanted to know what mods are needed to fit 35's on a surf heard its a fair bit of trouble iv done body lift 2" got susp comin soon anything else to do so the rubber will fit?
4in lift
Posted: Mon Apr 16, 2007 6:50 pm
by SHANE055
you'll need at least 4in of sus lift plus your body lift or some gaurdcutting
Posted: Mon Apr 16, 2007 8:01 pm
by yfz
IFS ?
Ive got 2" Body, 4" Suspension and the front tyres still rub a bit on full lock with 35" Wranglers.
?
Posted: Mon Apr 16, 2007 8:34 pm
by SHANE055
thats the procomp kit isn't it
thats what i've got with MTZ's and no scrub
Posted: Tue Apr 17, 2007 12:15 am
by yfz
Yeh Procomp........But the SR5 has a heap of plastic, Flares and mud flaps in the way!
Posted: Tue Apr 17, 2007 1:04 am
by zookdave
pre 1987 - 2inch body lift, 2inch suspension, 2 inch shackle
87 onwards - 4inch suspension lift, 2 inch body
correct if im wrong
Posted: Tue Apr 17, 2007 8:49 am
by ausyota
I have 35s on my IFS with only 40mm bodylift, no suspension lift
There has been a bit of chop chop on the firewall and guards though
With a surf you have to worry about clearance in the back too, with my ute I just made a tray that sits higher.
Posted: Tue Apr 17, 2007 12:55 pm
by TWISTY
315/70/R17 (35x12.5's) on 17x9's - 2" bodylift, 4" susp (BJ Spacers/Cruiser Coils)
Same lift with 37x14.5 IROKS's
Posted: Tue Apr 17, 2007 4:47 pm
by 4x4 wannabe
I've got a 92 4runner that I run 35" claws on. I don't have any suspension lift, i only have a 3" body lift. I had to cut 30mm off the end of my bullbar and do some minor inner gaurd mashing. I have no prob with scrubbing at full lock or at full articulation. I have photos but i need someone to tell me how to post them up.
Posted: Tue Apr 17, 2007 5:41 pm
by mico
ausyota wrote:
With a surf you have to worry about clearance in the back too
I had 35 Mtr's on mine and they scrubbed once and never did it again seems that i wore in very fast (just the plastic stone guard thingy on the front of the wheel arch
Posted: Tue Apr 17, 2007 6:44 pm
by Tuflux308
sell it and buy a real car !!!
Posted: Tue Apr 17, 2007 10:10 pm
by Wld_Srf
ha u geek nick
Posted: Wed Apr 18, 2007 5:27 pm
by 4x4 wannabe
[img]
http://i164.photobucket.com/albums/u21/ ... G_2254.jpg[/img]photos/IMG_2255.jpg[/IMG]os/I[img]
http://i164.photobucket.com/albums/u21/ ... an0003.jpg[/img]tos/scan.jpg[/IMG]MG_2253.jpg[/IMG] Hope these pictures help
Posted: Wed Apr 18, 2007 5:31 pm
by 4x4 wannabe
Posted: Wed Apr 18, 2007 6:46 pm
by Fatz2326
Posted: Wed Apr 18, 2007 7:01 pm
by 4x4 wannabe
Thanx for puttin' them up fatz, I just could'nt get it to work
[/img]
