Page 1 of 1
Good price on parts!??
Posted: Mon Apr 16, 2007 7:33 pm
by foolsp33d
good price?! or better of going thru zuki world or similar!??
BRAND NEW 4WD SWIVEL HUB KIT
ALSO KNOWN AS STEERING KNUCKLE KIT
COMPLETE KIT TO DO FRONT KNUCKLES BOTH SIDES LEFT & RIGHT (1 KIT PER CAR)
QUALITY KIT WITH JAPANESE BEARINGS
This kit includes 2 x inner axle seals, 2 x spindle (hub) bearing seals, 2 x spindle nut lock rings, 2 x knuckle felts and seals and 4 kingpin bearings
$88.50..
Posted: Mon Apr 16, 2007 7:37 pm
by =SKB=
I bought one. No problems so far with about 8 months use.
Posted: Mon Apr 16, 2007 7:38 pm
by foolsp33d
sweet:) included everything? no nasty surprises?! missing gasket tears, etc??
Posted: Mon Apr 16, 2007 7:48 pm
by =SKB=
foolsp33d wrote:sweet:) included everything? no nasty surprises?! missing gasket tears, etc??
Nothing missing or damaged in the kit I bought. Just give everything a good clean and degrease before starting out would be my only tip. I have heard people have issues with the seals and prefer to get factory ones, but I haven't had any drama with them.
Posted: Mon Apr 16, 2007 8:12 pm
by foolsp33d
yeah tend to have to clean the zuki before doing any thing with it! learnt that years ago!
Sweet! noticed you went for thier poly bushes to..
so after i read a few topics, the blue isnt to hard and restrict u on flex at all? is a "comfortable" ride, as good as a zuki can get?!? got extended shackles to go on so figured would do it all at once.. knuckles, bushes, might be safe n do the rear wheel bearings while im there..
Posted: Tue Apr 17, 2007 10:56 am
by =SKB=
I found the bushes to be pretty good. The purists will try and say the maybe 2-3mm of extra movement you get with a rubber bush is better, but the only problem I have found with the poly's is that they squeak sometimes. My original rubbers were flogged out and the new ones certainly tightened everything up and made the steering a whole lot better too. A few people on here have the poly's and haven't had any major issues afaik.