Outer Limits 4x4 Board

Looking at sound/heat proofing the GU and was wondering if this stuff is worth the money.

Has anyone used it and does it make a noticable difference.

dynamat is a bit exxy for general soundproofing. it is really good and is used by car audio enthusiasts all over the world. i would use it on door panels and so on but for the floor i would look at that bitumen style sound deadener.. easier to cut and isnt as messy oh and cheaper for large areas.

not sure how much but also jaycar has sound proofing for the doors etc and remember all deadening adds weight.

I have used the bitumen/felt stuff before and IMOP it isn’t the greatest around. Also the thickness can be a problem in some areas.

I know the Dynamat is pricy but don’t mind if the end result is good.

Are there other products that will do a good job but better priced???

I got one of the large packs of dynamat extreme, sound deadened both front door (outside and inside skin) and should have enough left over to do the footwells in my GQ, it isn't messy to use, just cut it,heat it up a bit with a heat gun and stick it on. I used it more for sealing up the doors for better stereo sound, but it did cut the road noise down a fair bit aswell.

I have used 2 boxes to do my 75 series. Expensive but well worth it.

sooty i got some stuff called fatmat off a bloke in oz on ebay,alot cheaper then dynamat,its bitumen based,foil back sticks on,i havent finished yet but it made alot of diff in my 60 series,i'll be buying another roll of this stuff,dynacrap was too dear for me.

davec wrote:sooty i got some stuff called fatmat off a bloke in oz on ebay,alot cheaper then dynamat,its bitumen based,foil back sticks on,i havent finished yet but it made alot of diff in my 60 series,i'll be buying another roll of this stuff,dynacrap was too dear for me.

Thanks

I will search around for it and compare.

sootygu wrote:

davec wrote:sooty i got some stuff called fatmat off a bloke in oz on ebay,alot cheaper then dynamat,its bitumen based,foil back sticks on,i havent finished yet but it made alot of diff in my 60 series,i'll be buying another roll of this stuff,dynacrap was too dear for me.

Thanks

I will search around for it and compare.

i couldnt find it on ebay :S

Stupid ebay always changes the search from "fatmat" to "fatmax" (stanleys range of tools).

yeah i had a look sooty,he hasnt got anythinjg for sale now,i sent him an email askin if he's getting more in because i'll need some as well,it was $130 +postage for 50sq feet,his name on ebay is matty_mola ,i'll let ya know when he gets back to me.
cheers dave

davec wrote:yeah i had a look sooty,he hasnt got anythinjg for sale now,i sent him an email askin if he's getting more in because i'll need some as well,it was $130 +postage for 50sq feet,his name on ebay is matty_mola ,i'll let ya know when he gets back to me.
cheers dave

Found this and sent him an email yesterday as well.

Could you let me know also davec when you get back to me as i will aslo be keen.

cheers

cuzza

i sent email this morn but haven't heard anything,he might be havin a break or somefin,hope not because i seen some of that dynamat this morn on ebay in oz,but its $200 smackaroos for 36sq feet,i think sooty sent email to him also,hopefully we'll hear something back.

cheers dave

I buy it in Perth for about 160 bucks. I will try and find a receipt.

i used a box full from ebay $300 ish worth in stores, and it did my whole car, well my eb falcon anyway, i am thinkin of usin it in my maverick, ill see how i feel, the stuff is bloody awsome tho and well worth the money

cooki_monsta wrote:i used a box full from ebay $300 ish worth in stores, and it did my whole car, well my eb falcon anyway, i am thinkin of usin it in my maverick, ill see how i feel, the stuff is bloody awsome tho and well worth the money

how much from ebay?

what was it called? (dynamat or other?_)