Page 1 of 1
Transfer case oil seals
Posted: Thu Apr 19, 2007 2:52 pm
by Mr Emu
G'day, i drive an 89 wt 1.3litre sierra. my t-case has been leaking oil from the oil seals. On closer inspection it looks like 2 seals can be replaced from the outside and the other on the opposite side of the case needs to be replaced from the inside? Is this correct? so that i would need to open up the transfer case to replace it. My manual is useless, has no detail!
Thanks Ian
Posted: Thu Apr 19, 2007 3:24 pm
by MART
Mate , Ive got a genuine manual and it sais all seals can be changed from outside once drive shaft flanges removed. Cheers Paul.
Seals sit just behind flanges.
2 , 16 , 35 are the seals.
Posted: Thu Apr 19, 2007 3:48 pm
by nicbeer
DL full manual from
www.suzukiinfo.com
drover is same as the NT and WT's abviously some differences but all mech is the same.
front input can be separated from the case in car i beleive.
Nic
Posted: Thu Apr 19, 2007 7:40 pm
by Mr Emu
that is good to hear, will save heaps of work!
thanks for the link to
Ian