Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lift dramas

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 49
Joined: Sun May 07, 2006 7:40 pm
Location: Hurstbridge, Melbourne

body lift dramas

Post by dogeatdog01 »

Hi,
Im currently installing a 2" body lift to my 88' SWB GQ.
I have undone all 8 bolts holding the body to the chassis and have removed rad shroud, loosened brake/clutch lines, loosened steering spline, etc and it should now lift off the body.

BUT!

When i put 2 jacks under the sills and try to lift it, the body wont seperate from the chassis and it lifts the whole car up as a result.

Any ideas?
Posts: 49
Joined: Sun May 07, 2006 7:40 pm
Location: Hurstbridge, Melbourne

Post by dogeatdog01 »

Just had another thought.
Would it be the fact that I havent undone the seatbelt bottom bolts cause it not to seperate from the chassis?
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

Didn't have to undo seat belt bolts for mine. Have you taken the bolts out or just the nuts off them? Also undo the fuel filler hose clamps.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

if you have crossmember spacers it could be the clutch line pulling tight as there is a bracket on the inner gaurd n one eather on chassis or gearbox
Posts: 49
Joined: Sun May 07, 2006 7:40 pm
Location: Hurstbridge, Melbourne

Post by dogeatdog01 »

Its all good now, seems that the chassis lifted for the first inch and then seperated from the body as I kept jacking it up further.
Post Reply

Who is online

Users browsing this forum: No registered users and 49 guests