Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
toyota 1Y dizzy timing problem.....
Moderators: toaddog, Elmo, DUDELUX
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville
Contact:
toyota 1Y dizzy timing problem.....
have just tired to fix the timing in my brothers runnabout POS 2wd hilux ....the timing was out and he decided to pull the whole dizzy from the block..... now i know if it doesnt go back into the correct postion it will not fire andnot start.... well guess what hes farked it and now im serously stuck.... any help please he needs to get back on the road to head back to cairns asap
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
place engine at top dead centre. mark dizzy where no 1 cylinder will fire (approx). drop dizzy in. rotate to align the mark that you made.
this is a rough start. now if engine doesn't start and back fires through the carby/ intake manifold. the timing was out by 180 degrees.
if starts and no timong light available rotate by hand until engine sounds to running ok. go to far and engine will stall and or ping whilst driving under load. hope this helps
this is a rough start. now if engine doesn't start and back fires through the carby/ intake manifold. the timing was out by 180 degrees.
if starts and no timong light available rotate by hand until engine sounds to running ok. go to far and engine will stall and or ping whilst driving under load. hope this helps
MUD, MUD, GLORIOUS MUD!
Who is online
Users browsing this forum: No registered users and 0 guests