Page 1 of 1
I need aluminium in Melbournes South East
Posted: Mon Apr 23, 2007 11:46 pm
by g35me
I need a piece of aluminium 25mm wide x 15mm high x 122mm long. Who sells stuff like that in Melbournes South East?
Re: I need aluminium in Melbournes South East
Posted: Tue Apr 24, 2007 12:09 am
by awill4x4
brian haines wrote:I need a piece of aluminium 25mm wide x 15mm high x 122mm long. Who sells stuff like that in Melbournes South East?
Brian, I think we've got some 15mm thick aluminium at work. I'll check it out tomorrow and if we've got any I'll cut it down on the bandsaw for you. If I can find an offcut piece I'm pretty certain it won't cost you anything. I live in Berwick also and you can pick it up at my place if you like.
Give me a ring at work tomorrow on 9775 0558 cause I've got a memory like a sieve. I'll be working late tomorrow night on my after hours part time aluminium welding job and I should be back about 9 pm.
Regards Andrew.
Re: I need aluminium in Melbournes South East
Posted: Tue Apr 24, 2007 7:41 am
by bogged
capral ally in Greens road dande?
Re: I need aluminium in Melbournes South East
Posted: Tue Apr 24, 2007 8:58 am
by MUSS
bogged wrote:capral ally in Greens road dande?
x2
Posted: Tue Apr 24, 2007 5:24 pm
by TwistedMQ
Smart aluminium in bayswater.
Posted: Tue Apr 24, 2007 11:58 pm
by awill4x4
Fcuk Capral and Smart, D&F Racing Products to the rescue yet again.
Regards Andrew.
Posted: Wed Apr 25, 2007 3:16 pm
by g35me
Thanks Andrew, if this was ebay you would have 100% positive feedback on this one
Posted: Wed Apr 25, 2007 3:52 pm
by YankeeDave
seeing how you've been looked after,
who sells al and steel on mornington penn?
Posted: Wed Apr 25, 2007 5:10 pm
by awill4x4
YankeeDave wrote:seeing how you've been looked after,
who sells al and steel on mornington penn?
Don't know about the peninsular but we get our Aluminium from Action Aluminium in Greens Rd Dandy (couple of "ex Smart" guys own it) and our steel from Melsteel in Hallam.
If it's only small pieces we may have some in stock.
Regards Andrew.
Posted: Wed Apr 25, 2007 8:22 pm
by bogged
awill4x4 wrote:Fcuk Capral and Smart, D&F Racing Products to the rescue yet again.
Regards Andrew.
do they have ICooler cores in stock??`