Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rust proofing how often?????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 77
Joined: Tue Apr 03, 2007 3:35 pm

Rust proofing how often?????

Post by scorpion »

Hay guys just wanted to know can anyone tell me how often do I have to rust proof my 4x4? Where can I get it done in brisbane? How much ? And is the spray stuff or the electronic better? :?: :?: :?:
chance favours the prepared mind
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

i personally am going to spray the under body and inside allm y panels with lanolin every 6-12 months.. before winter rocks up.
but then again i have a zook so if you want electronic styles then you must have a 'nice' 4by :)

lanolin in a can is like 10 bucks.
Top
Posts: 77
Joined: Tue Apr 03, 2007 3:35 pm

rust proofing

Post by scorpion »

I have a 2001 jeep cherokee v8 . So far off raod has been a top performer but as i want to look after it I was woundering about rust proofing it so you think that lanolin will be enough we go to the beach often.
chance favours the prepared mind
Top
Posts: 171
Joined: Sat Feb 11, 2006 1:38 pm
Location: Brisbane

Contact:
Contact Wilko76

Post by Wilko76 »

I would go both. I currently have "rust stopper" electronic protection. There are many models on the market. I hear coupler tec is good also.

I am in the process of tracking down spray also. Let me know how you go?
Top
Posts: 98
Joined: Thu Sep 21, 2006 4:14 pm
Location: Jabiru

Post by danos »

My car was done by "Rust Free Aust" . http://www.rustfree.com.au/

It seems to be a pretty good coating but it was expensive. I used to get 5L of tectol and 5L of fisholene and go at it myself with a compressor and spray gun.

Nowdays I just use a bit of lanolin.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest