Page 1 of 1

FJ60 Suspension

Posted: Tue Apr 24, 2007 10:35 pm
by griff88
Hi All New To Outer Limits Recently Bought FJ60 And Heard About Outer Limits Through Another Site. Anyway To The Point. I Have Just Put New Springs and Shackles On My Car I Can See The Shackles Are 4inches Oversize and Told The Springs Are Two Inches Over Size. MY QUESTION IS????? Nobody Can Tell me What The Standard Height Is Of A 60 Series Is. Ive Tried ARB Pedders TJM A Few Suspension Places In Perth But Nobody Can Tell Me What The Standard Height Is. I Can Buy What Ever Size Lift Springs I Want But Know Body Can Tell Me What The Standard Height Is.. Im Tring To Work Out Exactly How High I Have Lifted The Car If Anyone Can Help Me It Would Be Much Appreciated. Thanks..

Posted: Wed Apr 25, 2007 4:34 pm
by Shadow
http://carl.outerlimits4x4.com/viewtopi ... t=measured

my hj60 has origonal springs in it

If you measure from the centre of the hub to the edge of the wheel arch,
Just measured my 89 HJ60, still on origonal stock standard toyota springs.

480 rear (18.9")
515 front (20.3")

mine has probably sagged a bit but my shackle angles are still pretty good so it hasnt sagged an inch or anything. So a good estimate of origonal stock standard would be about 19.5" rear, 20.5" front.