Page 1 of 1
Frank, can you help please (or anyone else)
Posted: Sat Dec 06, 2003 3:22 am
by Ian Sharpe
Mate,
Do you know where I could get a schematic of the fuel tank plus fittings for the LWB 3.5l (3.o maybe the same).
I am converting back to petrol & have acquired a tank from my wrecker in Sydney but I'm sure I am missing some of the fittings.
I am going to the dealer on Monday armed with what I need to order.
Hope you can help, cheers
Posted: Sat Dec 06, 2003 10:43 am
by redrocket
you can download a pdf of the pajeros from here which from memeory has wiring diagrams in it. i think its the 6g72.pdf file/
http://www.pajero.dn.ru/6g72/
mike.
Posted: Sat Dec 06, 2003 10:47 am
by redrocket
actually i stuffed that up but that file is still good for the 6g72 motor. i have all the wiring pdf's here as well you can dload them from. can't find the link but i will email it to you.
Posted: Sat Dec 06, 2003 7:02 pm
by Bitsamissin
Ian, if you want I can fax them through first thing monday morning. There are about 3 relevant pages for a 3.5 V6 DOHC from my CAPS programme that show the fuel tank, fuel & breather lines, filter right up to the injector rails.
Your dealer should be able to give you the same printouts if he's a decent bloke.
Also the fuel lines/filter arrangement is different to a Gen 2 3.0 V6 according to the CAPS data.
Unfortunately all my workshop manuals are with the dude who is repairing my car (Gregory's etc).
Let me know if you need the CAPS printouts.
Frank.
Posted: Sat Dec 06, 2003 7:58 pm
by Ian Sharpe
Ok mate thanks, i'll let you know
cheers