Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU PATROL BRAKE GONE

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1
Joined: Sun Apr 29, 2007 7:37 pm
Location: Brisbane

GU PATROL BRAKE GONE

Post by TAZ's_DATTO »

mY PATROL IS A 99 MODEL AND HAS LOST ITS BRAKES, THE PEDAL GOES TO THE FLOOR AND IT WILL NOT STOP ANYWHERE NEAR AS QUICK AS IT DID ABOUT THREE MONTHS AGO.
ANY INPUT OR SUGGESTIONS WILL BE APPRECIATED, AS I AM AT A LOSS AS TO WHAT IS WRONG AND I DONT WANT TO GET RIPPED OFF BY SOME BRAKE GUY DOWN THE ROAD. CHEERS

UPDATE: NO LEAKS AND FLUID LEVEL IS ON MAX CONSTANTLY WITHOUT TOP UP, FLUID WAS CHANGED ON THE WEEKEND WITH NO CHANGE.
Last edited by TAZ's_DATTO on Sun Apr 29, 2007 8:30 pm, edited 2 times in total.
Posts: 202
Joined: Wed Nov 02, 2005 5:51 pm
Location: Morisset

brake gone

Post by henry »

Have you checked that the brake fluid reservoir is full still? If its full you shouldnt have any leaks. If its not full have a look around each wheel for brake fluid. If its not full and theres no sign of leaks the rear seal might have gone on your brake master cylinder and the fluid will be leaking into your brake booster.
I ought to report you to the f#cking RSPCA neville.
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

brake

Post by mav »

maybe a master cyl failing but sounds to me like contaminated brake fluid or air in brake system still.
see ya mav
AJS
Posts: 79
Joined: Sun Mar 20, 2005 10:51 am
Location: Exmouth WA

Post by AJS »

Does the GU have a proportioning valve? If so, check that. If you've had the car lifted, it may need adjustment.
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

porpotioning valves shit themselves n leak otherwise id say its the brake master piston bypassing
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests