Outer Limits 4x4 Board

Anyone have experience with the 73 series fiberglass windscreen surrounds on ebay ? http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1

THe surround on my car is fubar and I want to fix the rust up in my car over the next few months and the major contributer is the fucked surround. Or am i better off trying to find a second hand one?

cheers

Can be a real barstard to get the windscreen in as the lip that the window rubber pulls into is double if not triple the thickness of a steel one. Most times the will go in ok with a bit of gentle persuasion but sometimes the glass has to be trimmed down to fit in.

Would not touch them, i had one a few years ago that i bought cheap, i went to fit it up and it was a little bit twisted and the holes don't line up, other mates have had them on utes as well as middys and in time they crack to pieces, a second hand steel one if you can find it is a far better option but it will cost you atleast $600 notes or more. Geniune ones are highway robbery aswell, you may have better luck tracking down a jap import truck and get parts of that instead.

But don't make the mistake of getting the sh*t fiberglass ones.

Ben

Which state are you in? Sierrajim gave me details of a mate of his who was wrecking a couple of middys when I needed parts, he's in Melbourne though. Otherwise, would a 75 series fit?

V8 Middy wrote:Which state are you in? Sierrajim gave me details of a mate of his who was wrecking a couple of middys when I needed parts, he's in Melbourne though. Otherwise, would a 75 series fit?

Thats Evil73. He's got heaps of cheap parts.

sierrajim wrote:

V8 Middy wrote:Which state are you in? Sierrajim gave me details of a mate of his who was wrecking a couple of middys when I needed parts, he's in Melbourne though. Otherwise, would a 75 series fit?

Yep..

I have fitted one from 'FRP' in queensland. Cost was close to 500 and some of the holes did'nt line up, but otherwise was fine.

who is this guy wrecking middys? im after heaps of parts?