Outer Limits 4x4 Board

do pajero and triton have the same wheel offset?
or any other issues for swapping wheels between the two

AFAIK, they're the same.

the nm pajero wheels don't fit because they have a smaller diameter hole in the middle of the rim.

GLXR2005 wrote:the nm pajero wheels don't fit because they have a smaller diameter hole in the middle of the rim.

Yes - good point. Spot the owner of a Gen 2 Paj.

Gen 3 (NM/NP/NS) Pajeros have a significantly different offset from Gen 2 Pajeros. (Something like +45mm Gen 3 vs +10mm Gen 2.)

Latest Triton (reportedly) has front suspension very much like Gen 3 Pajero. So I don't know which wheel offset it has.

So, I'll go back a little.

Original Challenger, which was reportedly built on Triton mechanicals, had the SAME wheels as the NJ Pajero. So I presume Tritons of that vintage run the same offset as Gen 2 Pajero - can anybody confirm that?

If new Triton has Gen 3 Pajero front end, if may run Gen 3 Pajero offset. Anybody know?

Question for Jop: which model Pajero and which model Triton?

the new have a wierd off set, be the same as the new paj.. i got +25 for mine i think so the stick out a bit..

2005 glxr and 93 paj jtop

hoping new muddies (about to purchase 32" cooper stt) on j top will fit triton as well