Page 1 of 1
diff question
Posted: Mon Dec 08, 2003 4:30 am
by manus
how deep do the oil seals have to go in the front diff there is no edge on wich they stop who can help me
Posted: Mon Dec 08, 2003 11:02 am
by Toyhatsu
Manus,
For what model Daihatsu is this for? Is it the pinion shaft seal? My `91 service manual says to drive the new seal to the edge surface using special service tool 09517-87601-000. This tool looks like a piece of pipe of the same diameter as the seal. Maybe a large socket would work. Just drive it STRAIGHT in to the edge surface.
Hope that this helps...if not we need more information.
Posted: Mon Dec 08, 2003 11:19 am
by Toyhatsu
Manus,
For what model Daihatsu is this for? Is it the pinion shaft seal? My `91 service manual says to drive the new seal to the edge surface using special service tool 09517-87601-000. This tool looks like a piece of pipe of the same diameter as the seal. Maybe a large socket would work. Just drive it STRAIGHT in to the edge surface.
Hope that this helps...if not we need more information.
Posted: Mon Dec 08, 2003 7:07 pm
by snake
Use a socket, have always used one for mine gives good even distribution of pressure so they go in nice
