Page 1 of 1

URGENTLY NEED INFORMATION

Posted: Fri May 04, 2007 4:25 pm
by FrankS
I urgently need the Torque figures and pattern for 1989 F70 Rocky Diesel head bolts and the correct timing marks for cam and injector pump.
There are 2 marks on the front pulley, the first one has the cam and injector pump lined up with their marks on the block and the second mark on the pulley is TDC, can any one send me a diagram of the correct timing alignment and the head bolt pattern and torque figures.
Also is there a torque figure for the adjustable timing belt tensioner or do you have a set amount of belt deflection, would really appreciate your help, I,m trying to get my son's Rocky back on the road for work on Monday, Thanks in Advance, Regards Frank.

Posted: Fri May 04, 2007 6:25 pm
by Clint
I will have a look through the manual for ya and post it up if/when i find it.

Posted: Fri May 04, 2007 6:29 pm
by Clint
Here is the head bolt pattern and torque figures.
Image


I'll have a look for the other info.

Posted: Fri May 04, 2007 6:37 pm
by Clint
Timing mark info

Image

and belt tension check

Image

I hope this helps.

Thanks for the Info

Posted: Fri May 04, 2007 6:48 pm
by FrankS
Thank you Clint for your quick replies it is most appreciated and I hope I can be of assistance one day, Regards Frank.

Posted: Fri May 04, 2007 7:06 pm
by Clint
No worries. Hope it all goes ok.

Posted: Sat May 05, 2007 8:26 pm
by tabrocky
You can download PDF engine manuals from the WARFS website.
If the link below doesn't work, go to www.warfs.org then go to the "Daihatsu Manuals" button on the left hand side of the page. Then once that page opens, DONT download form the "1992 Rocky" column. Instead go across to the "F70, F75, F77" and then download the parts of the manual you need.

Cheers.

http://www.warfs.org/content/view/16/47/