I've just fitted some 34 / 11.5 to my Bundera. The rims are cut and flipped so when in full lock the tyres are scrubbing on the bottom rear of the wheel arch.i It has a suspension and body lift and i am reluctant to get out the angle grinder or persuader.
Thought i'd try spacing the control arms forward. What should I use?
Damian
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spacing Control arms forward
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Spacing Control arms forward
Last edited by bundyrules on Sat May 05, 2007 8:03 pm, edited 2 times in total.
Who is online
Users browsing this forum: No registered users and 110 guests