Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Coil Spacer Q's

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 121
Joined: Fri Jul 28, 2006 10:17 pm
Location: Riverton

Coil Spacer Q's

Post by rosie »

Hi all, I was going to order up a set of coil spacers but the company reacons the part number is the same for front and rear.

Is this the case or is something sus?

I would like 30mm rear and 15mm front spacers.

Thanks, Ben
Donning the Zook called Tara
Top
Posts: 223
Joined: Sat Sep 27, 2003 5:10 pm
Location: NW Sydney, NSW

Vitara coil spacers

Post by Impulsive »

Hi Ben,

Just be aware that the Vitaras are NOT a 1:2 ratio, or a 1:1.5 ratio in the front. I have found them to be about 1:1.7, so you should make your calculations accordingly.

As an example, by using a 25mm coil spacer, I got about 43mm lift.

Having said that, my vehicle is a SWB H/T, so that may have impacted on the result too.

Regards,

Adam
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Top
Posts: 121
Joined: Fri Jul 28, 2006 10:17 pm
Location: Riverton

Post by rosie »

thanks mate, i was actually hoping to get the rear higher then the front but was really just hoping to stop the scrubbing.
Donning the Zook called Tara
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests