Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
My 80 series has a problem with the headlights. Low beam, no probs but high beam extinguishes all the headlights. Spotties are ok. Checked fuses, relay and globes and all seem ok.
Not sure where to go from here.javascript:emoticon
Question
Inspect the contacts in the wand first. They can be cleaned sometimes. They get carbon deposits on the contacts in the wand from arcing. These contacts can be damaged by having high wattage globes in the headlights too.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Umm can anyone explain in laymans terms the negative switching concept. My bro and me had a play on the weekend and all sorts of funnystuff happened. We hotwired the LH side highbeam only back to earth and one spottie went out and the RH side highbeam dimmly glowed. If i understood a little more, then i would feel confident to expolre further.
