Page 1 of 1
feul cut solenoid
Posted: Wed May 09, 2007 11:12 am
by superzuki
giday my bros 1.3 zuk has been plaing up and we suspect that it is the solenoid on the engin side of the carby. we are trying to get a replacment but they are fairly expensive anyone know where you can get a cheap one or have a spare one they want to sell. or can they be brought back to life somehow?
thanks
fuel solenoid
Posted: Wed May 09, 2007 7:13 pm
by bennybigballs
take it out put a bolt with some loctite on it and tighten it back in problem fixed cover end of wire so doesnt short on anything easy as
Posted: Thu May 10, 2007 10:47 am
by vicelore
lol thats a awsome solution.
Posted: Thu May 10, 2007 11:01 am
by Gwagensteve
My brakes don't seem to be working very well, pads are really expensive, I was wondering if I should just clamp the hoses off and stop it in gear with the key....
Dude, the fuel cut solenoid is there (amonsgeth other thigs, I am sure) to help prevent engine fires by shutting off any potential fuel flow into the carby when the ignition is off. It is a safety feature- It might be worth coughing the $$$ and replacing.
Steve.