Outer Limits 4x4 Board

hey ive got a set of second hand 33" bfg muddies and im just wondering if anyone knows if they will fit on a stock 85 swb pajero. i allready got 15x8 rims so i got rims for the tyres but ive been told by people they will fit but then ive been told they wont fit so im just wondering if anyone knows. thanks heaps
stann

best way to find out is stick em on there!

if they fit it will be tight and youl scrub going over speed bumps

I havn't seen 33" fit on many stock vehicles... let alone an old Paj.

I have 33" MTR on my stock 80. It scrubs if I run over a 20c coin.

HTH

put them on , see where they rub , if it is only a little bit bash trim body to suit , or if it is a little bit more than you can trim/hammer , if it is leaf springs get some ext shackles (2" shackle gives 1" lift might need some castor wedges if it spins the diff to far) and wind up the torsions at the front to suit or if it is coil get some lwb coils and wind up the torsions at the front (in a 90mod swb its roughly 1.5-2inch lift).

noel

i hav 33s on a stock mq, and my fronts occasionaly scrub when offroad with no swaybars... an old paj shouldnt be to much dif...

hey thanks for the help guys but ive decided to do a 2'' body lift on it and then 2" shackles and some 1" spacer in the front and wind the torsion bars up a bit. then ill put my muddies on. thanks for the help

post up pics when she is done or start up a build up thread, it begins , this is how they all start ......

yer ill try to do my best to take some pictures while im doing it and get a before and after shot of it.
cheers,
stann

I have a mate running 32" mongrels on an older model jackaroo which is very similar in size and shape. He did a 2" body lift and a 3" Calmini kit and he still wouldnt be able to fit my swampers. depends on the offset of the rims too.

you can fit 35's on a gen1 paj with 2" bl and 2" sus