Probably a dumb question, but, are the extractors for Jimny motors interchangeable? As in would a set off the G13 fit the M13 or are the exhaust outlets and stud patterns diferent.
I have a G13 set and a M13 motor, mate fitting a G13 at the moment, if they won'y fit my new motor they might as well go on his. I know the simple answer is go and try, but I am not in a position to do so at the moment.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Jimny extractors
Jimny extractors
'89 SWB Soft Top, 6.5:1 Calmini gears, rear Lockright, 31s, pwr steering. 1.3 16vmpfi 1300 going in
Who is online
Users browsing this forum: No registered users and 2 guests