Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ZF auto pump

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

ZF auto pump

Post by UrbanRedneck »

Has anyone out there got a second hand pump as i was an idiot and pulled box up on bolts and broke the tabs off the gear. :oops: :oops: :oops:
I recomend to all not to do this as i have heard that i am not the first to do it. :roll: i have learnt a very important lesson.

If no one has one can you maybe recomend somewhere (Melb) that i would be able to purchase one at a reasonable price.
Thanx in advance for your help Damian :D
have grinder will fit
www.4Bfabrications.com.au
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

yep done this before we just changed over the gear. make sure you clean all the metal out

Mick
TD5 96 Discovery UTE.
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

ye i think quite a few people do it by what ive heard where did you get the gear from or does anyone know if one out of another auto may be the same.
have grinder will fit
www.4Bfabrications.com.au
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

lets just say they tried to fark us so we farked em harder!! One for the consumer!!
TD5 96 Discovery UTE.
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

:armsup: :D :twisted:
i like the way you think

by the way neet ride your workin on top job
have grinder will fit
www.4Bfabrications.com.au
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

cheers
TD5 96 Discovery UTE.
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

been here too.

try and find a wrecker with a very charr grilled rangie or disco. that gear would be one of the only things to survive a heavy fire. I got lucky, the first wrecker i went to had one sitting there he pulled out the day before from a cooked box. gave him a 20 for it. If you dont have any luck with wreckers, try Kar Craft in silverwater NSW for a newy, they are by far the cheapest for that stuff.

Andy
Posts: 30
Joined: Sat Jul 08, 2006 6:38 pm
Location: cranbourne

Post by disco-damo »

Try Jamie at All Ranges 4wd in Bayswater 97622600 if your in Melbourne, he seems to be able to get anything.

Failing that, theres a couple of rangie wreckers about, you gotta be able to get one somewhere.
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Thanx to everyone for the info but i found a place here in Dandenong who dont generaly deal with the public they just reco boxes and send them off but i must of sounded like a good bloke because they are goin to help me out with a second hand pump that has been checked over by them for $75.
:armsup: :armsup: :armsup: :armsup: :armsup: :armsup: :armsup:
have grinder will fit
www.4Bfabrications.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

UrbanRedneck wrote:Thanx to everyone for the info but i found a place here in Dandenong who dont generaly deal with the public they just reco boxes and send them off but i must of sounded like a good bloke because they are goin to help me out with a second hand pump that has been checked over by them for $75.
:armsup: :armsup: :armsup: :armsup: :armsup: :armsup: :armsup:
:D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

even better they put new orings in and front seal and a gasket for the box same price.
Will be taking slab down to them for that effort.
:D :D :D
have grinder will fit
www.4Bfabrications.com.au
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

good deal right there i reckon You scored well Heaps better then buying a new auto :armsup:
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest