Outer Limits 4x4 Board

Any body have a pic of the internal parts ?

And the housing ?


Larry.

yep, what do you want the photos for?

And i don't know how 2 upload them on this forum unless u can tell me how...

Brad ,

You can join Photobuket ,

http://smg.photobucket.com

upload to there then add the pics url to the post

and it will just apear

when you look at the pics in photobucket there are three sets of letters number at the bottom of each pic in little windows , its the bottom one you post to link it ,

Easiest way to get these is highlight the wanted address hold the ctrl key down and press c . The compute remembers this highlighted bit.
To deposit it somwhere put your curser where you want the address then hold the ctrl key and press v , bingo it apears .

Just interested in what is actually failing on these , what type of actuation is used , ect .

If all else fails just email the pics thanks Brad .

Rockapes@bigpond.com.au

Larry.

There's a left housing a right housing a clutch pack in each housing side gears that sit in the clutch packs that are splined and a tensioner spring assembly in the middle of the spider gear cross shaft.The spring in the middle is what governs the amount of "slip" the trouble with these units is that when every thing gets a bit worn they just stop working. You can add shims to the clutch packs roughen up the clutch plates and shim or renew the center spring but you'll end up wondering why you bothered because no matter what you do to a Toyota LSD sooner rather than later it will stop working.

what? Toyos have an LSD?

i just thought they were all opens haha

my cruiser is lsd tom

Yep I know they have a horrid rep

rofl jas.... i was joking... i know they have lsd.. its just i dont know why they bother as its fucked after they drive it out of the sale yard rofl

Dozoor wrote:Any body have a pic of the internal parts ?

And the housing ?


Larry.

I can email you a 4wd monthly article comparing datto LSD's and tojo LSD's when I get to work tomorrow if you like. Has lots of pics and drawings of the diffs

exellent ,

ill upload the photos later tonight when i get home.

Thanks for the info on the pics

:-/ cant use ISP webspaces anymore?? :(

http://members.optushome.com.au/warwick ... %20LSD.bmp

Hey Larry

I think i may have an old lsd sitting in the shed you can have to look at, from memory the outside is a bit chewed but all internals are ok/there.

Craig

i am uploading the pics now you can have a look when it is complete, sorry meant to do last nite.. Ill post the address when finished.

hope this works

http://s187.photobucket.com/albums/x72/bkosij/?

Awsome thanks Guys ,



Whats the story with yours Brad Just dosn't work ?





Craig Pm sent .

What do you mean, don't the photo's work or do you mean y did i pull it apart?

brad 93hilux wrote:What do you mean, don't the photo's work or do you mean y did i pull it apart?

Pics are great !

Y did you pull it apart

Dozoor wrote:

brad 93hilux wrote:What do you mean, don't the photo's work or do you mean y did i pull it apart?

Pics are great !

Y did you pull it apart

I pulled it apart to shim it up... i had to put 1.2mm either side of the lsd clutches to make them work, but it worked well then.

The other popular mod is to sandblast the friction plates.

beebee wrote:The other popular mod is to sandblast the friction plates.

Yeh??? What would that do?

brad 93hilux wrote:

beebee wrote:The other popular mod is to sandblast the friction plates.

Yeh??? What would that do?

make them more frictiony