alloy / poly fairlead where do i get one for reasonable $$$?
Posted: Sun May 13, 2007 9:41 pm
I have been looking for an alloy or poly hawse fairlead for running with synth rope with the offset mounting holes. i.e. the mounting holes are about 3/4" below the centre line of the rope slot.
i have only seen a poly one at procomp for $120
does anyone know who makes these, or whre i can get them for reasonable $$ i.e. <$100
there are heaps making the inline (i.e. hole slot hole all in line) but cant seem to find any ofset ones (apart from steel ones on ebay with only one radiused edge (hmm rope chop chop!!)
thanks fellas
cam
i have only seen a poly one at procomp for $120
does anyone know who makes these, or whre i can get them for reasonable $$ i.e. <$100
there are heaps making the inline (i.e. hole slot hole all in line) but cant seem to find any ofset ones (apart from steel ones on ebay with only one radiused edge (hmm rope chop chop!!)
thanks fellas
cam