Page 1 of 1
Wheel Alignment NP Pajero 2003
Posted: Thu Dec 11, 2003 6:08 am
by bazzle
Any one have the wheel alignment specs handy please?
Bazzle
Posted: Fri Dec 12, 2003 9:37 am
by Bitsamissin
Sorry don't have any workshop data for NM/NP's probly still too new.
Maybe call your local Mitsi dealer or tyre joint, they may have the camber/castor/toe in specs.
Frank.
Posted: Fri Dec 12, 2003 12:58 pm
by bazzle
Thanks anyway Frank.
Tried dealers and alignment shops... No help
Rang Mitsubishi Adelaide no help
" these are all aligned at pre delivery due to transport etc Not aligned at factory".. No one does though. Measured a few and all diiferent at either end?
Bazzle
Posted: Sat Dec 20, 2003 1:08 pm
by bazzle
Bump for Errol
Bazzle
Posted: Mon Jan 05, 2004 8:43 pm
by Juzza
Still need this?
Can give u what we use on NMs, don't know if anything has changed.
Posted: Tue Jan 06, 2004 7:46 am
by DougH
That model is the IFS IRS model right? Let me see if I can look it up for you... I have a factory genIII manual around here some where.
Posted: Wed Jan 07, 2004 12:16 am
by DougH
OK here is the info that my factory manual had, the manual was for a 2001, but it should help still.
Wheel Alignment:
Camber 0.00' +- 30'
Caster 3.50' +- 30'
Kingpin Inclination 11.30' +- 1.30'
Toe-in mm 2.5+-2.5
The periods should be degree signs. I hope this helps, I would scan the pages, but my scanner went tits up.