Outer Limits 4x4 Board

anyone know where i can get a decent genuine kit from?
any help would be great

cheers
JAKE

try some of the better 4b stores that do upgrades... thats where I would start, but then again, why not go with a better kit.. the 4.2 and 2.8 share the same intercooler..

bogged wrote:try some of the better 4b stores that do upgrades... thats where I would start, but then again, why not go with a better kit.. the 4.2 and 2.8 share the same intercooler..

Hmmm - makes you think a bigger/thicker one could be better for the 4.2 eh??

THANKS fellas but my mate wants what he wants... which is genuine

If its gotta be genuine, then you'd probably need to goto Nissan or get one off of a wreck at the wreckers...
Personally i'd buy an aftermarket cooler (pretty much any good front mount that can fit or something like a GTIR top mount depending on where you want it) and make the tubing up from stainless, probably cost a lot less and be more efficient.

I'd go for one at the wreckers, that way you get all the mounting hardware, hoses etc....... complete fitout.

Cheers...................Pete!

benhl wrote:

bogged wrote:try some of the better 4b stores that do upgrades... thats where I would start, but then again, why not go with a better kit.. the 4.2 and 2.8 share the same intercooler..

Hmmm - makes you think a bigger/thicker one could be better for the 4.2 eh??

without doubt.

Gruntahunta wrote:I'd go for one at the wreckers, that way you get all the mounting hardware, hoses etc....... complete fitout.

Cheers...................Pete!

gotta price mate?

cheers....JAKE

bogged wrote:try some of the better 4b stores that do upgrades... thats where I would start, but then again, why not go with a better kit.. the 4.2 and 2.8 share the same intercooler..

I looked into this and while they are the same size the core is different

AJ wrote:

bogged wrote:try some of the better 4b stores that do upgrades... thats where I would start, but then again, why not go with a better kit.. the 4.2 and 2.8 share the same intercooler..

I looked into this and while they are the same size the core is different

Sorry Herc, but the 2.8 ones are identical to the 4.2 just the plumbing is different. When Bruce had some problems with his blocked TD6 I/cooler he simply bolted up the 2.8 one he had to get him going again. I think the new common rail ZD30 ones are the same as the 2.8/4.2 intercoolers now, just as well seeing what a pile of pus the original ZD30 intercoolers are.
Regards Andrew.