Page 1 of 1
Sand anchor
Posted: Fri May 18, 2007 9:35 pm
by bundyrum4x4
Have done a search with no success, so if any else who is more computer experianced than me and can find links for me I would greatly appreciate it.
I need to get an anker for Cliffhanger and want to know a bit more about them from people who have used them. Any help appreciated.
Thanks
Posted: Fri May 18, 2007 9:46 pm
by Rhysta
Posted: Fri May 18, 2007 9:51 pm
by bundyrum4x4
Rhysta wrote:Helps to spell anchor right too.
Rhys
Posted: Sat May 19, 2007 6:18 am
by pongo
there were some on ebay
Posted: Sat May 19, 2007 7:28 am
by hammey
try Beadlock Australia, 1/19 railway cres. croyden, vic 3136
ph 0397239550
theyre those red bent one piece ones, they quoted me $380 for the heavy one.
Posted: Sat May 19, 2007 9:15 am
by Evil 73
smithie you can borrow mine to model off if you wish, let me know or you can borrow it for cliffhanger, if you break it just have to replace it.
Ben
Posted: Sat May 19, 2007 3:51 pm
by muddymav
Posted: Sat May 19, 2007 4:54 pm
by bundyrum4x4
Evil 73 wrote:smithie you can borrow mine to model off if you wish
Ben
Might take you up on that.
I made one some time ago but have not realy tested it. I don't want it to fail up there.
If I could have a look at yours it will give me a chance to compair.
Posted: Sat May 19, 2007 6:31 pm
by beretta
Mate in my humble opinion don't waste your time building one, buy one of Roger Smiths Ground Grabbers, we have used one in a few comps, Cliffhanger and OBC and they set really easily, they're strong and most important of all......they're proven! I personally wouldn't bother trying to build one (and I'm a budget bandit from way back!) because although they look basic there are a few tricks to them in terms of angles and strengths, we've seen lots of them fail or won't set, including those fold up ones.
Good luck with Cliffhanger mate, it's a great event.
Posted: Sat May 19, 2007 8:20 pm
by Evil 73
bundyrum4x4 wrote:Evil 73 wrote:smithie you can borrow mine to model off if you wish
Ben
Might take you up on that.
I made one some time ago but have not realy tested it. I don't want it to fail up there.
If I could have a look at yours it will give me a chance to compair.
The one i have i bought of chippa and its been used and tested in OBC and the like let me know what ya want to do smithie.
Ben
Posted: Sat May 19, 2007 8:50 pm
by muddymav